Click image to view full size image
This type of cutting machine for small gantry structure for the light, and LHLM-3A type of difference is compared to light beams, the vertical rails with steel T-rail; also has high accuracy, light weight, small inertia, the removal is easy, running stable characteristics, the price is among the gantry CNC cutting machine a most economical; the horizontal span of the optional model 2m, 2.5m, 3m, vertical rail a 3m / section; linear guides are used, the bilateral driver can be configured according to user requirements more than the separatist regimes can also be configured to dual-flame and plasma cutting; optional automatic adjusting system.
Â
| Cross Beam Length | 2.0m (can be lengthened according to user´s demand) | |
| Longitudinal Rail Length | 3.0m (Rail can be lengthened according to user´s demand) | |
| Effective Cutting Width (X axis) | 1.4m | |
| Effective Cutting Length (Y axis) | 2.0m | |
| Cutting Mode | Flame only; Plasma only; Flame and Plasma | |
| Drive Mode | Dual-side | |
| Drive Method | Rack and pinion drive for X and Y axes | |
| Flame Cutting Thickness | 6-200mm | |
| Plasma Cutting Thickness | 1-60mm (according to the specification of plasma power source) | |
| Cutting Speed | 0-3500mm per minute | |
| Moving Precision | 0.01mm per step | |
| Power Source | 220V 50Hz  500-1000W | |
| Cutting Gas | Acetylene, Propane | |
| Plasma Gas | Pressed air, Oxygen, N2 | |
| Marking Tool | ?? | |
| Torch Height Controller (AUTO) | CHC600 | Capacitive height control for flame cutting |
| PHC330 | Arc voltage height control for plasma cutting | |
E-mail: